StarlinkLeader Posted June 21, 2022 Share Posted June 21, 2022 HOWTO Factory Reset Starlink Dish & Router If you encounter any issues during the setup or use of your router, you can factory reset it. The router will take a few minutes to reboot, and will require you to reconnect and set a new Network ID and Password. Circular Starlink: Gently push the button on the bottom of the router until the light turns blue and release. Rectangular Starlink: Power cycle Starlink (unplug the router from power and then plug back in) 3 times in a row. The router will take a few minutes to reboot, and will interrupt your service until you set up again. You can expect the light on the bottom of the router to be illuminated when complete. There are no lights on the front of the router. Starlink Mesh router: Power cycle the mesh (unplug from power and then plug back in) 3 times in a row. When repairing the node, make sure you connect to your primary Starlink router's network. Do not connect to your mesh node's new "STARLINK" network that appears after plugging it in. Open the Starlink App. After 1-2 minutes, the Starlink App will prompt you with a "PAIR MESH NODE" notification. Note: A WiFi network name is also called an SSID. A Wifi password can be referred to as a network security key, WPA key or WAP/SPA2 passphrase. Notes: You can factory reset via Starlink mobile app however if you cannot connect, or dishy cannot connect - Its recommended to manually factory reset your starlink router. 1 Quote Link to comment Share on other sites More sharing options...
StarlinkLeader Posted September 19, 2022 Author Share Posted September 19, 2022 Update: How do I factory reset my starlink router and dish? If you encounter any issues during the setup or use of your router, you can factory reset it. The router will take a few minutes to reboot, and will require you to reconnect and set a new Network ID and Password. Network name will appear as "STINKY" or "STARLINK" in device WiFi settings. Standard (Circular): Gently push the button on the bottom of the router until the light turns blue and release. Standard (Rectangular) & High Performance: Power cycle Starlink (unplug the router from power and then plug back in) 3 times in a row. The router will take a few minutes to reboot, and will interrupt your service until you set up again. You can expect the light on the bottom of the router to be illuminated when complete. There are no lights on the front of the router. Starlink Mesh router: Power cycle the mesh (unplug from power and then plug back in) 3 times in a row. When repairing the node, make sure you connect to your primary Starlink router's network. Do not connect to your mesh node's new "STINKY" or "STARLINK" network that appears after plugging it in. Open the Starlink App. After 1-2 minutes, the Starlink App will prompt you with a "PAIR MESH NODE" notification. Note: A WiFi network name is also called an SSID. A Wifi password can be referred to as a network security key, WPA key or WAP/SPA2 passphrase. 1 Quote Link to comment Share on other sites More sharing options...
Karen Browne Posted February 10, 2023 Share Posted February 10, 2023 Ok, done this like 10 times, um, how do you like actually reset it to factory. I unplugged it and plugged it back 3 tine like 10 times, slow, long, quick, 1 min, like wtf Quote Link to comment Share on other sites More sharing options...
RicochetStarlink Posted February 12, 2023 Share Posted February 12, 2023 @KarenBrowne, @StarlinkLeader has posted above the Factory Reset process -- "Power cycle teh mesh... 3 times in a row." From your brief post, it sounds like you have followed this procedure. Would you, please, start a new thread and describe the issue(s) that you are experiencing in more detail? Quote Link to comment Share on other sites More sharing options...
Skyview Posted February 20, 2023 Share Posted February 20, 2023 Just plug and unplug like 6 times it will work .. had the same problem didn't work with 3 times but worked with 6 times in a row .. Good luck Quote Link to comment Share on other sites More sharing options...
RicochetStarlink Posted February 21, 2023 Share Posted February 21, 2023 Also, be sure that each time you plug the modem in that the plug is ALL THE WAY in and the modem light comes on before you unplug it again. Don't leave it for more than a second or two, though. Quote Link to comment Share on other sites More sharing options...
Mike Gilchrist Posted June 26, 2023 Share Posted June 26, 2023 Does the Starlink dish have to be up and running? I made the mistake of trying to reboot the router without the dish set up. Once the router had started to reboot, I couldn't initiate the dish. And without the dish, I couldn't get the router to finish its reboot. Quote Link to comment Share on other sites More sharing options...
RicochetStarlink Posted June 27, 2023 Share Posted June 27, 2023 @Mike Gilchrist, Rebooting the router should not require access to the dish as it does not involve downloading anything -- at least not initially. If Dishy is plugged into the router, then resetting the router will also reset the antenna. Quote Link to comment Share on other sites More sharing options...
JimboJones Posted April 20 Share Posted April 20 This is a dreadful way to perform a hard reset. What’s wrong with a button? Why are there no status lights on the router? I’ve had to buy decent networking equipment since the Starlink offerings are so restrictive and in the event I have to reset the network, I’ve also got to pull Starlink out of bypass mode by performing a factory reset?! Did you guys take a look at any contemporary offerings before deciding on this incomprehensible arrangement? 1 Quote Link to comment Share on other sites More sharing options...
Beegle Posted April 23 Share Posted April 23 @JimboJones Gen3 now has a button (the Gen2 seems cringe, I feel lucky skipping that phase) Quote Link to comment Share on other sites More sharing options...
RicochetStarlink Posted April 25 Share Posted April 25 On 4/19/2024 at 8:08 PM, JimboJones said: This is a dreadful way to perform a hard reset. What’s wrong with a button? Why are there no status lights on the router? I’ve had to buy decent networking equipment since the Starlink offerings are so restrictive and in the event I have to reset the network, I’ve also got to pull Starlink out of bypass mode by performing a factory reset?! Did you guys take a look at any contemporary offerings before deciding on this incomprehensible arrangement? @JimboJones, no one here works for Starlink we all are (or were) customers. We feel your pain, but we didn't cause it. 😉 Quote Link to comment Share on other sites More sharing options...
lofez10jennifer Posted 9 hours ago Share Posted 9 hours ago https://starlinkforum.net/topic/6303-【【1-877-658-0930】】-how-many-days-before-a-delta-flight-can-you-cancel/ https://starlinkforum.net/topic/6304-【【1-877-658-0930】】-what-is-the-cancellation-policy-with-southwest-airlines/ https://starlinkforum.net/topic/6306-【【1-877-658-0930】】-does-frontier-refund-you-if-you-cancel/ https://starlinkforum.net/topic/6308-【【1-877-658-0930】】-how-much-does-it-cost-to-cancel-frontier/ https://starlinkforum.net/topic/6307-【【1-877-658-0930】】-do-you-get-travel-money-if-you-cancel-frontier/ https://starlinkforum.net/topic/6309-【【1-877-658-0930】】-can-you-cancel-with-frontier-within-24-hours/ https://starlinkforum.net/topic/6310-【【1-877-658-0930】】-what-is-the-cancelation-policy-for-american-airlines/ https://starlinkforum.net/topic/6312-【【1-877-658-0930】】-what-is-the-cancellation-policy-for-united-airlines/ https://starlinkforum.net/topic/6313-【【1-877-658-0930】】-whats-alaskas-cancelation-policy-now/ https://starlinkforum.net/topic/6316-【【1-877-658-0930】】-does-alaska-airlines-still-have-free-cancellation/ https://starlinkforum.net/topic/6315-【【1-877-658-0930】】-how-late-can-you-cancel-alaska/ https://starlinkforum.net/topic/6317-【【1-877-658-0930】】-can-you-get-an-alaska-airlines-refund-after-24-hours/ https://starlinkforum.net/topic/6318-【【1-877-658-0930】】-how-to-avoid-jetblue-cancellation-fee/ https://starlinkforum.net/topic/6319-【【1-877-658-0930】】-do-you-get-your-money-back-if-you-cancel-a-trip/ https://starlinkforum.net/topic/6321-【【1-877-658-0930】】-can-you-cancel-an-allegiant-flight-without-penalty/ https://starlinkforum.net/topic/6325-【【1-877-658-0930】】-how-much-is-the-change-fee-for-allegiant-flights/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.